TOAGER T120 Bike Tail Light

TOAGER T120 Bike Tail Light

 

• 🚨 Smart Brake Sensor: Automatically flashes brighter for 1 second when slowing down, signaling your intentions to traffic behind you.
  
• 🌞 Intelligent Light Mode: Saves battery and adapts to conditions – sleeps after 2 minutes idle, wakes with vibration, disables flashing in bright daylight.
  
• 💡 5 Versatile Lighting Modes: Choose the perfect visibility for any ride (Steady, Single Flash, Breathing, Rotating, Variable).
  
• 🛡️ Built Tough for All Weather: Robust aircraft-grade aluminum housing with IPX6 waterproof rating – withstands heavy rain.
  
• 🔋 Exceptional Battery Life: Up to 50 hours runtime on flashing modes (24h steady).
  
• ⚡ Fast Charging: Fully recharged in ~2 hours via convenient USB Type-C port.
  
• 📏 Ultra-Compact & Lightweight: Tiny footprint (28.5x35x35mm) and weighs just 27.3g – barely noticeable on your bike.

• 
  

  Feature	Specification
  Dimensions	28.5mm (L) x 35mm (W) x 35mm (H)
  Weight	27.3g (without mount)
  Construction	Aircraft-grade Aluminum
  Waterproof	IPX6 (Heavy Rain Resistant)
  Charging	USB Type-C (~2 hours to full charge)
  Battery Status	4 LED Indicators
  Low Voltage Cutoff	Auto-shutdown below 2.8V

  

• Runtime Modes:

  • Steady On: 24 hours
  • Single Flash: 50 hours
  • Breathing Flash: 40 hours
  • Rotating Flash: 40 hours
  • Variable Flash: 50 hours

   

1. Power On/Off: Hold button for 2 seconds.
2. Change Mode: Single click cycles through modes (Steady → Single Flash → Breathing → Rotating → Variable → Loop).
3. Toggle Smart/Manual Mode: Double-click.
   • Smart Mode: Sleeps after 2min idle; wakes with vibration; disables flashes in daylight.
   • Manual Mode: Always active, regardless of light or vibration.
4. Enable/Disable Brake Sensor: Hold button for 3 seconds when powered on (3 flashes = disabled). Repeat to re-enable.

• ⚠️ For Optimal Brightness: Clean the lens regularly.
• ⚠️ Prevent Corrosion: Avoid prolonged exposure to saltwater.